Asphalt Crack Repair Package Is A Turnkey Business of Its Own!
Whether you are looking to repair cracks as a business of its own, or you are a large property owner and would like to repair cracks in driveways and parking lots, this system can get it done fast and professionally!
The Asphalt Crack Repair Package helps you fill 25 feet of cracks in just 15 seconds! It's quite simply the best hot pour crackfilling system available on the market today.
By sealing and protecting cracks, you extend the life of the paved surface. For you or for your clients, it just makes sense to stop the damage before it starts, and prolong the life of the asphalt.
A Simple Business Idea
If you're looking for a way to make back the purchase price or to add a service to your existing blacktop maintenance business, think of adding crack filling. You can charge up to $1 per linear foot for crackfilling, and you can fill 25 feet of cracks in just 15 seconds. You do the math!
Use it as an upsell to your additional products, or as a stand-alone business, and do between $500 and $1,000 a day in profits.
Let Us Be Your Supplier
This package comes with a pallet of crack filler, shipped directly to your door. By ordering direct to your door, you spend your time out generating new business, not standing in line, loading and unloading supplies. Let us be your supplier: set up regular shipments of your crackfiller or call us for advice on quantities and selling techniques.
The Asphalt Crack Repair Package: your simple solution to preserving and protecting asphalt.
Features
The AK10 Asphalt Crack Repair Machine:
- Melts cubes of rubber crackfill and applies it into asphalt cracks
- No cleaning required
- Temperature gauge
- High Power Burner Torch
- AK10 holds 10 gallons of crackfill and the AK15 holds 15 gallons of crackfiller
- Extremely easy to operate
- 11 gauge steel
- 3 year warranty
- Comes with the Torch Burner and hosing (Propane tank not included).
- Capable of melting and applying up to 700 pounds of hot pour crack filler per day which adds up to approximately 6300 Linear feet of 1/2 cracks.
- Heats 40 pounds of Crackfill in under 7 minutes.
- Direct Fire.
- One man operation.
- Everything is assembled and ready to do quality crack sealing. (Propane bottle not included)
- Length: 47" x Width: 27"x Height: 36"
- Weight: 110 Lbs.
- 6 Month Guarantee!
The Asphalt Kingdom Hot Pour CrackFiller:
- 300 to 400 linear feet of coverage per 50 lbs box of crackfill.
- 100% Commercial grade rubberized asphalt crack sealer designed to fill cracks and seal out water and ice
- Lasts and looks beautiful for 3 to 4 years.
- Dries in 2 hours.
- Ships to your door immediately in 4 to 5 business days.
- 5 year Shelf Life.
- Non Flammable below 400 degrees F.
Specifications
Hot Pour Crackfiller Specifications:
Section One: Product Identification
| Product Name: AK Hot Melt Crack and Joint Sealants |
Note: This MSDS complies with requirements of the Hazardous Communication Standard, OSHA 29 CFR 1910.1200 |
| Chemical Name, Family, and Synonyms:Rubber Modified Asphalt Materials |
Hazard Classification:
Health =1
Fire =1
Reactivity=0 |
| Formula: Mixture contains asphalt cement rubbers, extenders, and reinforcing fillers |
| DOT Shipping Classification: Non Haz Mat |
Emergency Assistance: 419-621-1966 |
Section Two : Hazardous Ingredients / Identity Information
Hazardous Components
(Specific Chemical Identity / Common Name)
|
AGGIH TLV |
| Asphalt (CAS 8052-42-4) |
5mg/m3 |
Section Three: Physical Chemical Characteristics
| Boiling Point: Greater than 600*F |
Specific Gravity: (H20=1) 1.0-1.3 |
| Vapor Pressure: (mm Hg) Not Applicable |
Melting Point: (ASTM-D36, Ring and Ball Softening Point)
160-220*F |
| Solubility in Water: Negligible |
Appearance and Odor: Black adhesive, odor of petroleum
Solid at 77*F / liquid above 275*F |
Section Four: Fire and Explosive
Flash Point: (Method Used) C.O.C (ASTM-D92)
424*F Minimum |
Special Fire Procedures: Use of self-controlled breathing apparatus in enclosed areas and full body protection gear including face shield, trench coat, gloves, and rubber boots. Concentrated vapors from combustion should not be breathed. |
| Flammable Limits: N/A |
Unusual Fire and Explosuion Hazard: Material will not burn unless pre-heated. Black, dense, hazy smoke forms during burning. Keep sparks away from concentrated fumes. |
| Extinguising Media: Co2, Dry Chemical, Foam |
