Pave Prime Oxi-Bond Asphalt Sealer Primer – 275 Gallon Tote
- 1:1 concentrate, yields about 550 gallons ready to use
- Spray, brush, or roll, dries in 30 to 60 minutes
- Boosts adhesion on oil spots and oxidized asphalt
Free Shipping to commercial address with a dock or forkliftAvailability: In stock
Big-lot performance from a contractor-scale tote
When you face oxidized pavement, polished aggregate, or oil-stained lanes, you need a dependable asphalt sealer primer that keeps production moving. Pave Prime Oxi-Bond in a 275 Gallon Tote delivers predictable bonding and fast dry time at scale. Crews use it to standardize prep on malls, distribution yards, airports, and municipal roads where consistency and speed matter.
Use with asphalt emulsion sealer to complete the system and streamline your sealcoating workflow across multiple sites.
Why this primer for asphalt improves adhesion
Oxi-Bond wets into porous or slick surfaces to create a uniform base. This primer for asphalt is field-proven to:
- Lock down oxidized or weathered surfaces for even sealer laydown
- Tighten localized oil contamination so finish coats adhere
- Prime fresh hot mix patches and polished aggregates for uniform appearance
The result is a sealer coat that bonds better and wears more evenly across lanes and stalls, with fewer hot spots or early failures.
How to use on live jobs without slowing the crew
- 1. Clean thoroughly and let the area dry. Address heavy oil with a proper cleaner before priming (e.g., Oil-Flo Safety Solvent Cleaner).
- 2. Dilute 1:1 with clean water and mix well. This asphalt sealer primer doubles working gallons for large projects.
- 3. Apply by spray, brush, or roller at the listed coverage rate. Keep a dedicated line and gun for primers to avoid cross-contamination.
- 4. Allow 30 to 60 minutes to dry. Verify by touch, then apply your finish sealer.
Tip: Stage the tote near the work zone and recirculate as needed to maintain a uniform mix. This primer for asphalt supports continuous production without extra trips to the tank farm.
Recommended uses for consistent results
- Old porous lots, oxidized surfaces, and sun-baked lanes
- Oil-stained drive lanes, dumpster pads, and drive-thru areas
- Fresh hot mix patches and polished aggregate zones needing a tie-coat
Pair with sealcoating spray systems for large parking lots to keep coverage rates predictable and hit tight schedules.
Storage and handling that protect the product
- Keep the container closed when not in use.
- Recirculate before dilution to ensure uniform solids.
- Protect from contamination and freezing.
Why crews choose Pave Prime Oxi-Bond at scale
Contractors pick this asphalt sealer primer for its reliable bonding on problem surfaces, fast dry times, and easy spraying from tote setups. It keeps sealcoating crews on pace, reduces rework, and helps maintain a clean, uniform finish across the entire lot.
Order the 275 Gallon Tote now to keep crews moving.
| Product | Pave Prime Oxi-Bond Latex Primer Concentrate |
|---|---|
| Size | 275 Gallon Tote (IBC) |
| Type | Latex rubber based primer concentrate |
| Dilution | 1:1 with clean water |
| Total Yield (diluted) | Approximately 550 gallons |
| Coverage (diluted) | 180–360 sq ft per gallon (about 0.025–0.05 gal per sq yd) |
| Dry Time | 30–60 minutes before applying finish sealer |
| Application | Spray, brush, or roller |
| Typical Surfaces | Oxidized asphalt, oil spots, fresh hot mix patches, polished aggregate |
0
5 stars
0% (0)
4 stars
0% (0)
3 stars
0% (0)
2 stars
0% (0)
1 star
0% (0)
Share your thoughts with other customers
Top customer reviews
No reviews
