Pave Prime Oxi-Bond Asphalt Primer – Half Pallet (18 Pails)
- Strong asphalt bonding agent for tough surfaces
- Seals oil spots and preps oxidized asphalt
- Concentrated asphalt sealer primer formula for maximum coverage
Free Shipping to commercial address with a dock or forkliftAvailability: In stock
Key Features & Benefits
Pave Prime Oxi-Bond Primer is a professional-grade asphalt primer concentrate engineered to strengthen adhesion and extend the life of your pavement sealer. As a trusted asphalt bonding agent, it's ideal for polished, oxidized, porous, or oil-contaminated asphalt surfaces. This product helps you achieve consistent, long-lasting results across every job.
- Strong Surface Bonding: Works as an effective asphalt sealer primer for tough conditions, reducing sealer failures and callbacks.
- Oil Spot Isolation: Locks out oil contamination to prevent peeling and bleeding under sealer coats.
- Easy & Cost-Effective: 50/50 dilution ratio extends coverage and value without compromising effectiveness.
- Quick Dry Time: Dries within 30–60 minutes, letting you move efficiently through jobs.
Application Instructions
- 1. Clean asphalt surface thoroughly before application to ensure primer bond.
- 2. Mix Pave Prime Oxi-Bond 50/50 with clean water for optimal application.
- 3. Apply using a sprayer, roller, or brush, ensuring full surface coverage.
- 4. Allow 30–60 minutes for the primer to dry before applying any asphalt sealer.
How to Know if You Can Prime an Oil Spot
Before applying any asphalt primer like Pave Prime Oxi-Bond, it’s critical to determine if the oil spot is treatable—or if it’s beyond saving and needs patching. Use this simple jobsite key test to make the call:
The Key Test: Quick Field Check
- Press a key or flathead screwdriver into the oil-stained asphalt.
- If the surface gives way or crumbles: The oil has deeply penetrated the pavement. Priming won’t work—and torching or infrared alone won’t fix it. The asphalt is compromised and must be cut and patched using cold patch or full-depth infrared repair.
- If the surface is solid and resists the tool: You’re good to go. Just hot pressure wash and chemically treat the spot, then apply this primer to seal residual oils before sealcoating.
This test protects your job quality and reputation—helping you avoid sealcoat failure, tracking, or callbacks down the line.
Contractor Tip: Partner with a local hot pressure washer service for degreasing. Most charge $150–$300 per visit and it’s a smart upsell that adds value and builds trust with your clients.
Recommended Uses
This asphalt bonding agent is ideal for:
- Mid-size commercial parking lots and maintenance projects
- Residential driveway sealing and restoration
- Municipal and airport pavement maintenance
Storage & Handling
- Storage Conditions: Store in a dry, shaded location with lids sealed tight.
- Freeze Warning: Do not allow product to freeze as it may lose performance properties.
- Product Life: Shelf life is 12 months under proper conditions.
Why Choose Pave Prime Oxi-Bond Primer
Choosing this asphalt primer not only boosts surface prep quality but shows your commitment to doing the job right. When paired with the right tools—like a sealcoat sprayer or a manual squeegee—you’ll maximize results and reduce project time. This asphalt bonding agent delivers the durability and ease every contractor or property manager needs.
Recommended Products to Use With This Primer
- Asphalt Emulsion Sealer – Compatible with Oxi-Bond for traction and longevity.
- Sealcoat Sprayer Machines – Ensure fast and even application of sealers and primers.
- Sealcoating Squeegee – Great for manual detail work and touch-ups.
- FSA Fast Sealing Additive – Accelerates drying and enhances sealer performance.
| Shipping Weight | 835 lbs |
| Shipping Length | 50" |
| Shipping Width | 37" |
| Shipping Height | 34" |
| Product Type | Latex Asphalt Primer Concentrate |
| Packaging | Half Pallet (18 Pails), 5 Gallons Each |
| Total Volume | 90 Gallons |
| Dilution Ratio | 50% Primer / 50% Water |
| Coverage per Gallon | 180–360 sq. ft. diluted (.025–.05 gal/sq. yd.) |
| Drying Time | 30–60 minutes |
| Cleanup Method | Soap and water |
| Shelf Life | Up to 12 months (sealed, proper storage) |
| Note: Weight and dimensions are estimates. Actual values may vary slightly due to packaging and freight terminal scanning. | |
0
5 stars
0% (0)
4 stars
0% (0)
3 stars
0% (0)
2 stars
0% (0)
1 star
0% (0)
Share your thoughts with other customers
Top customer reviews
No reviews
