Asphalt Kingdom
GET EXPERT ADVICE 1-866-399-5562
The 24" DRIVE stencil is a must-have addition to any contractor’s collection. The elongated letters make it easy to be seen by oncoming traffic or moving vehicles from a distance. The bold wording makes it stand out against the pavement for a long-lasting effect. This stencil is typically seen marking drive through lanes or signifying which direction a car can drive in. It can be combined with the standard “THRU" or “WAY" signs for added clarity and direction. This stencil is manufactured in the USA and comes with a warranty that guarantees that the product will be delivered without any defects that could hinder it from use.
The specifications and measurements of this stencil comply with industry standards and are fit for use in most publicly accessible areas. When painted, the stencil measures a width of 61" and a height of 24" for easy readability. The material itself measures 67" wide by 30" high, adding several inches of space on all sides to account for overspray. The stencil is printed on a single sheet for easy application, cleanup, and storage.
For a range of durability and flexibility, decide which material grade your stencil will be made out of. Each stencil lays flat out of the box and can be reused as many times as the grade allows. For long-time use, try the 0.080" ALU or the ?" LDPE PRO-Grade, which allow you to reuse the same stencils thousands of time without any wear or tear. The ALU comes with a thermoplastic aluminum for special projects to make it quite indestructible. For something on the lighter side, the 1/16" LDPE and the 0.30" HIPS are thin materials that offer a quality stencil to be used once or twice. These are cost effective options which can ensure accuracy as they lay flat.
The specifications and measurements of this stencil comply with industry standards and are fit for use in most publicly accessible areas. When painted, the stencil measures a width of 61" and a height of 24" for easy readability. The material itself measures 67" wide by 30" high, adding several inches of space on all sides to account for overspray. The stencil is printed on a single sheet for easy application, cleanup, and storage.
For a range of durability and flexibility, decide which material grade your stencil will be made out of. Each stencil lays flat out of the box and can be reused as many times as the grade allows. For long-time use, try the 0.080" ALU or the ?" LDPE PRO-Grade, which allow you to reuse the same stencils thousands of time without any wear or tear. The ALU comes with a thermoplastic aluminum for special projects to make it quite indestructible. For something on the lighter side, the 1/16" LDPE and the 0.30" HIPS are thin materials that offer a quality stencil to be used once or twice. These are cost effective options which can ensure accuracy as they lay flat.
| Stencil Width | 61" |
|---|---|
| Stencil Height | 24" |
| Shipping Width | 61" |
| Shipping Length | 30" |
| Shipping Height | 10" |
| Shipping Weight | 9.8 lbs |
