Pure Asphalt Mastic PL – Oil-Jacketed Mastic Asphalt Sealant (56 Boxes / 2,240 lbs)
Details
Specs
Reviews
Resources
Make it a Biz
FAQs- Buy 4 for $1,874.75 each and save $255
Pure Asphalt Mastic PL is a professional-grade, pourable mastic sealant trusted by contractors to permanently repair cracks, fatigue zones, and surface damage. This repair solution locks up tight in one pass—no callbacks, no do-overs.
- Polymer muscle – resists flex, rutting, and temperature swings
- Aggregate-loaded – bridges wide cracks and joint failures without extra stone
- Oil-jacket safe – melts smooth at 380 °F with no smoke
Free Shipping to commercial address with a dock or forkliftAvailability: In stock
Overview: A Long-Lasting Crack and Surface Repair Solution
In asphalt maintenance, long-term results come from what’s under the surface. Pure Asphalt Mastic PL is a hot-applied patching material engineered for wide cracks, fatigue zones, trench edges, and surface degradation.
Its polymer-modified binder forms a long-lasting seal that stands up to traffic, UV, and weather swings—an enhanced, cost-effective way to restore pavement when full replacement is overkill.
Biggest payoff: Durable, one-pass, permanent repair solution that keeps crews productive and properties protected.
Mastic should be your top choice when you need strength, speed, and smooth results without the hassle of full-depth removal.
Key Features & Benefits of This Crack Filler
| Feature | Why It Matters on the Job |
|---|---|
| 180 °F softening point | Won’t rut or track on hot pavement |
| Long-lasting seal | Holds strong and reduces callbacks |
| 56-box pallet (2,240 lb) | Bulk quantity means fewer refills, more uptime |
| 380 °F pour temp | Clean melt, perfect for pourable application |
| Multi-surface compatibility | Works on asphalt and primed concrete joints |
How to Use
- 1. PPE First – Wear gloves, eye protection, and heat-safe clothing.
- 2. Prep – Blow out dust, debris, and moisture; substrate must be ≥ 40 °F and rising. Ideal for alligator cracks, trench edges, and wide joints.
- 3. Melt – Load into an oil-jacketed kettle with agitation. Hold steady at 380 °F.
- 4. Application – Pour material into the repair zone, overfill slightly, and lute flush.
- 5. Open to traffic – Cures in about 30 minutes at 75 °F.
- 6. Sealcoat or stripe – Apply after surface cools below 140 °F.
- 7. Installation Tip – Simple installation—just heat, pour, and lute.
Need pro-level support? Use crack filling equipment like the RY10 Elite Melter Applicator for smooth, efficient field application.
Recommended Uses
- Drive lanes, parking lots, roads, and commercial pavements
- Wide fatigue zones, joints, and alligator cracks
- Trench edges, manholes, curb transitions
- Where crack sealants fall short and traditional patching is overkill
- Compatible with bridge decks and transitions (with proper priming)
Pair with Oxi-Bond Primer for better grip on oil-contaminated or smooth concrete surfaces.
Storage & Handling
Store cartons indoors on pallets. Rotate stock and use within 24 months unopened. Maintain material below 400 °F to preserve binder integrity. Purge lines daily to prevent clogs and ensure a smooth startup.
Why Choose Pure Asphalt Mastic Sealant
- Pro-proven performance – Designed for real crews, real conditions, real results
- Durable finish – Lasts through seasons and heavy traffic
- Pourable efficiency – One-step fix with no compaction needed
- Contractor-trusted – From installation to cure, it gets the job done
- Fewer delays – Quick set time = more jobs completed per week
ANSWER FOR YOUR CONCERNS
| Questions | Answers |
|---|---|
| What is mastic asphalt used for? | It’s used to repair joints, wide cracks, trench edges, parking lot fatigue zones, and damage too severe for standard sealers. |
| Can I reheat leftover material? | Yes—reheat safely if kept below 400 °F. |
| Does it replace infrared patching? | Yes, for shallow and mid-depth defects. Infrared is still ideal for full-depth base failure or color matching. |
| Is additional aggregate needed? | No. It’s pre-mixed for optimal strength and load-bearing. |
| Can I use this on concrete? | Yes, when primed properly. Pair with Oxi-Bond for best adhesion. |
| How long before I can sealcoat? | Usually once surface temp drops below 120–140 °F—same day in most conditions. |
| Packaging | 56 × 40 lb boxes (2,240 lb pallet) |
| Recommended Pour Temp | 380 °F |
| Maximum Heat Temp | 400 °F |
| Softening Point | ≥ 180 °F (ASTM D36) |
| Cone Penetration | ≤ 45 @ 77 °F (ASTM D5329) |
| Bond | Strong mechanical and chemical bond |
| Resilience | ≥ 30 % @ 77 °F |
| Flexibility | Pass 1″ mandrel @ 20 °F |
0
5 stars
0% (0)
4 stars
0% (0)
3 stars
0% (0)
2 stars
0% (0)
1 star
0% (0)
Share your thoughts with other customers
Top customer reviews
No reviews