Redesigned in 2018! Do you need fast way to melt enough crackfill to do small jobs quickly and profitably? Our new RY10MK Stationary Melter Kettle is redesigned with a new ignitor, and an even faster burner! Melt enough crackfill to fill 1,000 - 2,000 feet in 10-12 minutes - no waiting around for half an hour or even an hour to get enough melted crackfill. Save time, and save money.
If you're looking for a faster, safer, cheaper way to melt hot rubber crackfiller anywhere on the job site, this is your melter. The RY10MK Portable 10-Gallon Kettle is designed to be attached to a trailer or truck, or you can put it on a skid and move it around the job site as you work.
The 16-gauge steel RY10MK uses a unique, patented sealed burner design that melts 50 pound bricks of hot rubber crackfiller much more quickly - and more evenly - than torch-fired models. Because the burner is sealed, you can kiss flame-outs goodbye. Bring on the wind! What's more, it uses less fuel than traditional melter-applicators too - 35-50% less fuel, depending on ambient temperature. Time saved = money in your pocket!
The burner has another great feature - an automatic flame-out sensor. This means that should the flame go out for any reason, the RY10MK will stop fuel from flowing to the burner. No more dangerous build-up of propane waiting for the next person who tries to light the machine - and no more wasted propane, either! Backflashes are a thing of the past.
Lighting a melter has never been easier. The RY10MK has an electric push-button ignition so you never have to fumble around for a striker or lighter again.
The kettle also has a UL-approved regulator and fuel lines, so you know that you'll have complete control over the amount of fuel that's going to the burner at any point. It's also got an insulated spacer between your propane cylinder and the heat of the kettle, which means a longer-lasting tank.
This machine includes a glycerine-filled thermometer for longer-lasting, precise readings. Use the sturdy molasses valve on the side to dispense crack fill to your pour pot once it reaches temperature.
The flat bottom of the kettle is complemented by 45-degree angle sides, which allows easy agitation (so the brick doesn't get stuck in one corner or another) and allows unmelted product to reach the hot sides faster. Heat distribution is key to faster melting. Note too that there are no internal welds in the melting area, which means longer-lasting equipment. Rynoworx also included a lid lock-down this year so you can move from job site to site with crackfill still in the kettle.
RynoWorx powder coated this machine inside and out so it will last. It's been tested to work optimally at temperatures from -13°F to 104°F. Expect to get enough material melted to cover approximately six hundred feet of hot pour rubberized crackfill per hour using this machine and a bander.
The RY10MK rethinks the way crack repair equipment should work. If safety, speed, and savings are on your requirement list, this is the right machine for you.