This is the professional-grade sealer used by contractors on runways, roadways, and driveways. The 55-gallon drum is the perfect size for parking lot projects and roads. Spray with the AK55 Sealer Sprayer or apply with a sealer brush or squeegee for small areas.
- Commercial airport-grade means long-lasting..
- Thick enough to seal hairline cracks and protect pavement surface from the weather and traffic.
- Shipped quickly right to your place of business - saves you time!
As a residential homeowner you want access to your driveway as soon as possible after sealing your driveway and our sealer makes this possible. Drying time is 3 to 4 hours.
As a sealcoating contractor you will have a MAJOR advantage over your competition when using AsphaltKingdom's Sealer. Your competition's sealer takes approximately 24 to 48 hours to dry. Asphalt Kingdom's Sealer takes 3 to 4 hours to dry. When you're talking to potential customers you can let them know about this. It provides a major sales conversion edge for you.
A 55-gallon drum of sealer will do six to eight 4-car driveways. Its coverage rate is 100 square feet per gallon. To ensure your sealer is mixed, use our AK Drum Mixer – this mixes your sealer fast and eliminates downtime.
Sealer dries as the water evaporates. If a heavy fog or rain rolls in while the sealer is setting, it will extend the drying time. Working on a mission-critical project such as the drive-through lane at a fast-food restaurant? We recommend adding Quick-Cure Sealcoat Superdryer. This product helps to speed up the evaporation of water in the sealer, making it possible to drive on the sealcoated area much sooner. As with all things, the higher the humidity and the lower the temperature, the longer sealer will take to dry in general.
Asphalt Kingdom ships in concentrate form to maximize the benefits of shipping expenses. You can dilute the sealer up to 30% (recommended dilution is 20-30%) with water when using a spray system. Dilute less when asphalt is in rough condition. The sealer must be agitated properly to ensure the best results. Cut coverage in half if applying manually.
Sealer concentrate is diluted 20% so it is ready to spray as soon as you get it.
*Please Note: Free shipping on our Sealer does not apply to the following states: Washington, Oregon, California, Nevada, Arizona, Utah, Wyoming, Montana, Alaska, or Hawaii. Please contact us for the best shipping rates to your area. 1-866-399-5562
Storing Sealer in Winter?
Unused material should be stored in an area that will remain at least 40°F (5°C). The largest sealer containers such as totes should be agitated at least once a week for 30 minutes when stored. Drums can be stored for longer periods without agitation provided a power mixer is available to stir the barrel prior to using. The solids in the sealer will begin to settle in the containers (clay and tar) the longer they are stored without mixing. However, as long as the product has not frozen it can be remixed although the longer it sits without mixing, the more difficult it will be to stir. Therefore, if you have a chance to mix in the offseason, the better the sealer will be prepared to use in the spring.
When mixing before using, power agitation is suggested (a heavy-duty drill and mixing paddle). It is often easier to stir in the drum and then pour the sealer into an empty drum to make sure all of the solids have been mixed back in.
Let us help you determine what you need.