Preformed Thermoplastic Combi Arrow Standard Left (12'9" x 7'6", Color Options)
This 1-piece, FHWA-style symbol eliminates hand-painting mistakes, speeds up installs, and delivers a clean, consistent finish. Choose Tuff-Mark standard for a smooth result, or upgrade to Tuff-Grip skid-resistant for extra traction. Add optional surface glass beads when night visibility is a priority.
- Fewer left-lane near-misses
- No overspray, no stencils
- Add grip for turn zones, beads for night pop
FREE SHIPPINGAvailability: In stock
Have questions? We’re here to help!
Speak to an Asphalt Expert!
Clean Left Guidance Without the Headache of Paint Layout
The preformed thermoplastic combi arrow left gives you a bold, professional marking in one piece. It is ideal for lane splits, turn pockets, and entrances where drivers need an obvious left movement.
Key Features & Benefits
- 1-piece install: faster alignment and fewer setup steps
- FHWA-style symbol: consistent look across lots and roadways
- Durable thermoplastic: built for traffic and weather
Choose Your Finish: Tuff-Mark Standard vs Tuff-Grip
- Tuff-Mark (Standard): smooth finish for typical driving lanes
- Tuff-Grip (Skid-Resistant): adds traction where slip risk is higher
Add optional beads for stronger night reflectivity, and consider a Reflective Glass Bead Dispenser for consistent application.
How to Use
- 1. Clean and dry the surface completely.
- 2. Position and align the arrow.
- 3. Torch apply evenly until bonded.
- 4. Allow to cool and harden before traffic (usually a few minutes).
Recommended Uses
- Lane splits and left movement lanes
- Commercial property entrances
- Shared internal drive lanes
Need matching arrows across the lot? Add a Preformed Thermoplastic Straight Arrow or a Preformed Thermoplastic Turn Arrow, Reversible.
Storage & Handling
- Store indoors, dry, and protected.
- Keep within 35°F–90°F when possible.
- Handle carefully in colder conditions.
Why Choose This Arrow
- Fewer callbacks from sloppy layouts
- Faster installs than painting and masking
- Options for traction and reflectivity when required
Add it to cart and mark left movements with confidence.
Have questions? We’re here to help!
Speak to an Asphalt Expert!
| Product Type | Preformed Thermoplastic Combi Arrow (Left), FHWA style |
|---|---|
| Size | 12'9" x 7'6" |
| Pieces per Pack | 1 pc |
| Finish Options | Tuff-Mark Standard (smooth) or Tuff-Grip (skid-resistant) |
| Color Options | White, Yellow, Black, Blue, Bike Lane Green, Red, Orange, Purple |
| Optional Add-On | Surface glass beads |
| Installation | Torch-applied |
| Traffic Re-Open | After cooling and hardening (typically a few minutes) |
| Storage | Store indoors, dry, 35°F–90°F recommended |
0
5 stars
0% (0)
4 stars
0% (0)
3 stars
0% (0)
2 stars
0% (0)
1 star
0% (0)
Share your thoughts with other customers
Top customer reviews
No reviews
No primer is required for typical asphalt installs. These are designed to bond with heat. For unusual surfaces or questionable pavement, follow your spec or contact support.
Remove dust, sand, and loose material. The pavement must be clean and dry before you torch it down.
Once it cools and hardens. Cooling is typically only a few minutes. Cool water can speed the cool-down.
Tuff-Mark is the standard smooth finish. Tuff-Grip adds skid resistance for higher traction in wet or turning areas.