For line striping large-scale projects such as airports, roads, sports fields, and parking lots, the PowrLiner 6955 provides the power and output needed for you to complete these jobs with the crispest lines.
Power is what you need for finishing the big projects, and power is what you get with the 163cc Honda® OHV Engine and easy electric start from the new PowrCenter™. Easy-to-use controls and small added comforts, such as a recharging port for your cellphone or mp3 player, a holding tray, and a cup holder, help make the PowrLiner 6955 a strong line striper that makes your job easier.
5.5HP ● 2.25 GPM ● 3300 PSI ● 0.050" Tip (max)
New PowrCenter™ with electric key start, 12V charging port for cellphone or mp3 player, throttle control, pressure gauge, pressure control knob, storage tray, cup holder, and spray tip holder.
New SmartArm™ with pivot and lift systems to facilitate line adjustments and transportation/storage
New Deadlock Handlebars to adjust and lock handlebars into virtually any configuration
New Swing-Back Stem Design increases the ease to push and lift the line striper
Includes S-3 spray gun and second gun kit
Includes anti-static hose (1/4" x 50' long)
Pneumatic tires for smooth traction
Solvent-resistant and corrosion-resistant epoxy-finished frame
Can I put a 5-gallon can on the machine and spray without adding water to the paint?
You should never add water to paint. This is ready to go with a fresh five gallon pail. If the parking surface is bumpy, take some of the paint out before you start so you don't hit a bump and spill.
I would like to know if I need to clean the spray gun with mineral spirits before using it?
With a new Titan machine, it’s a good idea to flush the entire system and gun with mineral spirits before using it. If using latex/waterborne paint, flush with soap/water before you pour paint into the 5 gallon pail.
Will this machine work with Oil Based Paint?
Yes, this machine can work with both Oil-Based Traffic Paint and Water-Based (Latex) Paint.