Traffic paint so reliable the Daytona Racetrack uses it. Take advantage of our mix-and-max program to see massive discounts if you buy 5, 12 or 24 pails! The price is so low we can only show it in the shopping cart - add your colors and then go to the cart to see your savings. Prices below are per 5-gallon pail.
This paint is meets Federal Specification TTP 1952-B - a low VOC paint that is safe for you, your crew and the environment. Buy in bulk and get great savings!
Dry time is 45 minutes - perfect for busy parking lots.
You'll get 325 lines of paint at the standard 4-inch width if you apply at the normal 15 mil wet thickness.
This special formula will not settle during shipping or storage - just buy and apply! We recommend you use an airless line striping machine to get the best, most professional looking finish.
Use for:
This satin-finish traffic marking paint is water-based acrylic latex co-polymer, so you can clean up with soap and water. Be sure to protect it from freezing, as that will ruin the paint.
Proudly manufactured in the USA.
Apply this traffic marking paint when the pavement is above 50°F and the air has less than 80% humidity. If the temperature gets colder through the day, or the humidity rises, expect drying time to take longer. If you apply it when it is much colder or much more humid, the drying chemistry may fail entirely so choose your painting days carefully. Be sure to protect the lines until they are completely dry.
New Asphalt and Concrete must be aged for at least 30 days and cured properly and free of any laitance (the milky deposit that sometimes appears on the surface of new concrete) before paint is sprayed.
So sorry that you had to go through such trouble. Humidity can have a huge effect on how long sealer cures. If, after 24 hours and the sealer still feels tacky to the touch, it has not cured sufficiently. If it hasn't had ample time to cure, then it will bleed.
We recommend at least 24 hours of dry hot weather to allow the sealer to cure properly. If the weather is humid, overcast and moist, it will be harder for sealer to cuter, which can lead to bleeding through the paint.
| Viscosity | 80-90 KU |
| Weight Solids | 52-55% |
| Drying Time | at 77 deg. 50 % RH, maximum 40 minutes. |
| Coverage | 110 sq ft / gallon |
